Publicité
Les langues disponibles
Les langues disponibles
Allows you to perform descaling. This process requires the use of KRUPS descaler sachets.
Eliminates any deposit of limescale or tartar that can influence the taste of the coffee.
Descaling
When the number of drinks is not enough for descaling to be necessary, the function is not
active.
Allows you to access the filter setting to install it, change it or remove it. Maximises the life
Filter
of your machine, removes any trace of chlorine or limescale for a more delicious coffee.
Info
The "Info" menu gives you the opportunity to access information on:
The use of your machine
Certain steps in the life of your machine
Information of the upkeep requirements
Here we present to you the main information available.
Drinks prepared
Coffee circuit cleaning
Descaling
Filter
To access the Filter menu
- Press Settings
.
- Using the navigation arrows
"
".
Installing the filter cartridge
- In the Filter menu, select "Insert".
- Turn the grey ring located on the upper end of the filter cartridge until it displays 2 months.
- Empty the water tank and screw the filter cartridge in the bottom of the water tank using the accessory supplied
with the cartridge.
- Fill the water tank and put it back in place.
- Let the machine guide you to finish the installation.
Replacement of the filter cartridge
- In the Filter menu, select "Change".
- Remove the water tank and remove the old filter cartridge.
- Turn the grey ring located on the upper end of the filter cartridge until it displays 2 months.
- Empty the water tank and screw the new filter cartridge in the bottom of the water tank using the accessory
supplied with the cartridge.
- Fill the water tank and put it back in place.
- Let the machine guide you to finish.
Remove the filter cartridge
- In the Filter menu, select "Remove".
- Remove the water tank and remove the old filter cartridge.
It is important to replace the filter cartridge properly on the date indicated.
Displays the number of drinks made.
Indicates that it should be done in x cycles.
Indicates that it should be done in x cycles.
Indicates that it will be changed in x days or x litres.
FILTER CARTRIDGE
go to "Maintenance" and press "
" and then go to "Filter" and press
33
Publicité
