Télécharger Imprimer la page

Citizen JCTV3241XB Manuel D'instructions page 11

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
TV does not
• Try another AC outlet.
operate.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems,
tune to another station.
Poor sound
• Check VOLUME and MUTE.
or No sound.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
Poor picture
• Check antenna or CATV connections, adjust
or No picture.
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems,
tune to another station.
Poor recep-
• Make sure channels are set into memory.
tion on some
• Station is weak, adjust antenna to receive
channels.
desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
tune to another station.
• Make sure channels are set into memory.
Poor colour
• Check picture control adjustments.
or no colour.
• Check antenna or CATV connections, adjust
antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems,
Picture
tune to another station.
wobbles or
• Make sure channels are set into memory.
drifts.
• CATV company is scrambling signal.
• Adjust antenna.
SPECIFICATIONS
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
Receiving Channels:
Input:
Dimensions:
Weight:
ACCESSORIES
Remote Control
Instruction Manual
Design and specifications are subject to change without notice.
120V, 60Hz
100 Watts
IC Solid state
20 inches (measured diagonally)
2.5 + 2.5 Watts
51mm x 119mm (2 x 4-11/16 inches) Full Range, 8 ohm x 2
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct Access, 2 x AAA batteries (not supplied)
VHF
2-13
UHF
14-69
CATV
01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
S-Video
Y: 1.0 Vp-p/75 ohms
C: 0.3 Vp-p/75 ohms
Video:
(RCA) 1.0 Vp-p/75 ohm
Audio:
(RCA) –8 dBm/50K ohm
Antenna: VHF/UHF IN 75 ohm coaxial
590mm (W) x 483mm (D) x 444mm (H) [23-1/4 (W) x 19 (D) x 17-1/2 (H) inches]
22.0 kg (48.5 Ibs)
SYMPTOMS
POSSIBLE SOLUTIONS
• Check all CATV connections.
No CATV
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try
reception.
another station.
• Check antenna connections, adjust or
Horizontal or
re-direct antenna.
diagonal bars
• Check for sources of possible interference.
on screen.
• Make sure TV/CATV menu option is in the
No reception
appropriate mode.
above
• If using antenna, check UHF antenna
channel 13.
connections.
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to TV
No Remote
(within 15 feet).
operation.
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the
Remote and the TV.
• Make sure the power cord is plugged in.
• No broadcast on station tuned.
TV shuts off.
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or program
tuned is not closed captioned. Try another
Closed
channel.
Caption is
• Check CATV connection or VHF/UHF
not activated.
antenna, reposition or rotate antenna.
• Press TV/CAP/TEXT button to turn on the
closed caption decoder.
Display is not
• Select proper language in the menu options.
shown in your
language.
11

Publicité

loading