Kenwood multipro EXCEL FP980 Serie Mode D'emploi page 9

mini processor bowl
Use the mini processor bowl to chop herbs and process small quantities of
ingredients e.g. meat, onion, nuts, mayonnaise, vegetables, purées, sauces
and baby food.
a mini processor knife blade
b mini processor bowl
to use the mini processor bowl
1 Fit the detachable drive shaft and bowl onto the power unit.
2 Fit the mini processor bowl - ensuring the ribs on the inside of the mini bowl
chimney align with the slots in the main bowl chimney
3 Place the knife blade over the drive shaft
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
safety
Never remove the lid until the knife blade has completely stopped.
●
The knife blade is very sharp - always handle with care.
●
important
Don't process spices – they may damage the plastic.
●
Don't process hard food such as coffee beans, ice cubes or chocolate –
●
they may damage the blade.
hints
Herbs are best chopped when clean and dry.
●
Always add a little liquid when blending cooked ingredients to make baby
●
food.
Cut foods such as meat, bread, vegetables into cubes approximately 1-2
●
cm ( ⁄ – ⁄ in) before processing.
1 3
2 4
When making mayonnaise add the oil down the feed tube.
●
midi bowl
An extra bowl is supplied which can be used with all the discs. Just fit inside
the main bowl and fit the discs and lid as stated in the slicing/shredding disc
section.
centrifugal juicer
(if supplied)
Use the centrifugal juicer for making juice from firm fruit and vegetables.
pusher
b lid
c pulp remover
d filter drum
e bowl
f juicing spout
g juicer drive adaptor
to use the centrifugal juicer
1 Fit the juicer drive adaptor onto the power unit
ensure the adaptor is located correctly.
2 Then fit the juicer bowl. Place the handle towards the back and turn clockwise
until it locks .
3 Place the pulp remover into the filter drum - ensuring the tabs locate with the
slots in the bottom of the drum
4 Fit the filter drum .
5 Place the attachment lid onto the bowl, turn until it locks and the feed tube sits
over the handle
Your juicer will not operate if the bowl or lid are
not fitted correctly into the interlock.
6 Place a suitable glass or jug under the juice outlet.
7 Cut the food to fit the feed tube.
8 Select Auto and push down evenly with the pusher - never put your
fingers in the feed tube. Process fully before adding more.
After adding the last piece, let the juicer run for a further 30 seconds to
●
extract all the juice from the filter drum.
All manuals and user guides at all-guides.com
.
.
– push down lightly to
.
safety
Do not use the juicer if the filter is damaged.
●
The cutting blades on the base of the filter drum are very sharp, take care
●
when handling and cleaning the drum.
Only use the pusher supplied. Never put your fingers in the feed tube.
●
Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
●
important
If the juicer starts to vibrate, switch off and empty the pulp from the drum.
●
(The juicer vibrates if the pulp becomes unevenly distributed).
Maximum capacity that can be processed at one time is 1Kg of fruit or
●
vegetables (refer to speed chart).
Some very hard foods may make your juicer slow down or stop. If this
●
happens switch off and unblock the filter.
Switch off and clear the pulp collector regularly during use.
●
hints
Before processing remove stones and pips (eg pepper, melon, plum) and
●
tough skins (eg melon, pineapple). You don't need to peel or core apples
and pears.
Use firm, fresh fruit and vegetables.
●
To maximise juice extraction place small quantities at a time in the feed tube
●
and push down slowly.
Citrus fruit - peel and remove the white pith, otherwise the juice may taste
●
bitter. For best results use the citrus press.
attachment storage box
Your food processor is supplied with a storage box for your bowl
attachments and discs.
1 Fit the whisk, knife blade, dough tool and discs into the storage box when
not
in use .
2 The storage box is fitted with a safety lock
latch to the left to lock . To open slide the latch to the right
care & cleaning
Always switch off and unplug before cleaning.
●
Handle the blades and cutting discs with care - they are extremely sharp.
●
Some foods may discolour the plastic. This is perfectly normal and won't
●
harm the plastic or affect the flavour of your food. Rub with a cloth dipped in
vegetable oil to remove the discolouration.
power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of
●
food debris.
Store excess cord in the storage area at the back of the machine
●
detachable drive shaft/juicer drive adaptor
Wipe with a damp cloth, then dry.
●
Do not immerse the drive shaft or adaptor in water.
●
liquidiser/mill
1 Empty the goblet/jar before unscrewing it from the blade unit.
2 Wash the goblet/jar by hand.
3 Remove and wash the seals.
4 Don't touch the sharp blades – brush them clean using hot soapy water,
then rinse thoroughly under the tap. Don't immerse the blade unit in
water.
5 Leave to dry upside down.
twin beater geared whisk
Detach the beaters from the drive head by gently pulling them free. Wash in
●
warm soapy water.
Wipe the drive head with a damp cloth, then dry.
●
Do not immerse the drive head in water.
6
- close the lid and slide the
.
.