GARDEO PRO GSTD52D Traduction Des Instructions Originales page 43

A warning that the vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used and of the need to identify safety measures to
protect the operator that are based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool is switched off and when it is
running idle in addition to the trigger time).
8.TROUBLE SHOOTING
PROBLEM
Unit won't start or starts
but will not run.
Unit starts, but engine
has low power
Engine hesitates
PROBABLE CAUSE
Incorrect starting procedures.
Incorrect carburetor mixture
adjustment setting.
Fouled spark plug.
Empty fuel tank.
Fuel filter is plugged
Incorrect lever position
Dirty spark arrestor screen
Dirty air filter
Incorrect carburetor mixture
adjustment setting service
dealer
Incorrect carburetor mixture
adjustment setting
Air filter is plugged
Old or improperly mixed fuel
CORRECTIVE ACTION
Follow instructions in the user
Manual.
Have carburetor adjusted by
Authorized Service Center
Clean/gap or replace plug.
Fill fuel tank with properly mixed
fuel.
Replace spark arrestor screen
Move to RUN position
Replace spark arrestor screen
Remove, clean and reinstall
filter.
Have carburetor adjusted by an
Authorized Service Center.
Have carburetor adjusted by an
Authorized Service Center.
Replace or clean the air filter.
Drain gas tank/add fresh fuel
mixture
43