GARDEO PRO GSTD52D Traduction Des Instructions Originales page 38

5. OPERATING INSTRUCTIONS
Starting / Stopping the machine
COLD START
1. Turn the switch to position I.
2. Move the choke lever to the CLOSE position (B).
2. Pump the fuel by pressing the priming pump (C) 10 times.
5. Pull the starter grip 4-6 times, until the engine starts (D).
6. Move the choke lever to OPEN position (E).
7. Press the lock button and then the trigger (B) to start the operation.
HOT STARTING
1. Move throttle lever (A) to idle detent position move the stop switch to "I" position
2. Then push the throttle level on the OPEN position.
3. Pull recoil starter handle and engine should start.
38