GARDEO PRO GSTD52D Traduction Des Instructions Originales page 36

3. ASSEMBLY
1. Assemble straight pipe with swivel to the pipe (13).
2. Assemble flexible pipe (13) to elbow (12) on blower.
3. Assemble clamps (A1 and B) onto both extremities and tighten.
4. Loosen wing nut(C) completely, install stick handle clamp (D).
5. Align notches (E) in handle clamp; stick handle should be angled away from operator.
6. Slide the stick handle onto pipe (14).
7. Position the stick handle for comfortable operation and tighten wing nut(C).
8. Assemble the pipe (17) to the straight pipe (16), turning straight pipe counter-clockwise to lock
in place.
9. Assemble straight pipe (16) to straight pipe (15) with the clamp (A2)
NOTE: keep the throttle cable as straight as possible when connecting the blower tube
36