Publicité
Les langues disponibles
Les langues disponibles
stops working, switch the device off and
leave for 15 minutes so that it can cool
down, and then remove surplus of food.
List of parts (fig. A)
1.
Lid
2.
Glass container
3.
Blade
4.
Body of the device
Cut power switch in the form of a button is located underneath the
device.
Charging
•
Connect the device to the mains charger via the USB-C port
(7, fig. A). Use a 5V, 2A power adapter.
•
During charging, the indicator light (5, fig. A) glows red.
•
Fully charged – the light illuminates in white.
•
Battery discharged – the light will turn red ten times.
•
It is recommended to charge the device for about 3-5 hours.
While charging, the device will not turn on.
Device operation
•
Make sure the silicone ring is in the right place (fig. 9).
•
Before you start blending, make sure the glass container is
tightened firmly and the indicator light has turned white five
times. If the container is not properly tightened, the indicator
light will turn red five times.
•
The maximum temperature of liquids is 40°C.
•
The amount of ingredients should not exceed the maximum
amount indicated on the glass container.
•
In the event of overloading or blockage, the device will automatically
turn off and the light will alternately turn white and red.
•
If the device turns off during use, switch to a higher gear by
pressing the power button twice (5, fig. A).
5.
On/off switch / indicator
light
6.
Base
7.
USB-C port
EN
Publicité
