DURAVIT C14200 013U 10 Notice De Montage Et D'utilisation page 4

These instructions are part of the Duravit
product and must be read carefully and kept
available at all times.
Target readership and qualifications
The product may only be installed by a qualified
plumber.
Explanation of the key words
Indicates a hazardous
CAUTION
situation which, if not
avoided, could result in minor
or moderate injury.
Addresses practices not
NOTICE
related to physical injury.
Technical data
Operating pressure
Recommended
Test pressure
1 MPa = 10 bar = 145 PSI
Hot water temperature
For use with showerheads rated at 6.1 l/min
(1.6 gpm) or higher.
This unit meets or exceeds the
following:
• ASME A112.18.1
• CSA B125.1
• ADA Compliant
4
MAL_57166/19.03.2
Safety instructions
Cut and crush injuries
> Wear gloves when installing the product.
Product and/or property damage
> Observe the local installation regulations and
> Equalise pressure differences between cold
> Observe the manufacturer's instructions for
max. 72.5 PSI
43.5 PSI
72.5 PSI
max. 140 °F
any country-specific standards at all times.
and hot water connections.
installation with continuous flow heaters.