HQ Power VDL150GML Notice D'emploi page 6

All manuals and user guides at all-guides.com
4.
Features
• stand-alone, music controlled working mode with adjustable motion speed
• stand included
5.
Overview
Refer to the illustrations on page 2 of this manual.
1 microphone
2 laser aperture
3 motor controller
4 mode select button
6.
Operation
• Install the VDL150RGML in the desired location. Either hang it by the
mounting bracket or place it on the included stand (screw the stand in the
bottom of the device).
• Plug the dc plug from the included mains adaptor in the 5Vdc input.
• Make sure the device is switched off ([7] + safety key) and plug the mains
adaptor into a suitable mains outlet.
• Turn the safety key and switch the device on by setting the function switch
[7] to the middle position for normal operation, or completely to the left for
strobe effect.
• Use the mode select button [4] to choose between automatic mode or
sound controlled mode.
• To change the speed of the moving lights in auto mode, turn the motor
controller [3].
• When the strobe effect is selected, change the strobe speed with the strobe
speed controller [6].
• Switch off the device with both the function switch [7] and the safety key.
Note: it is strongly recommended to switch off the device after 2 hours of
continuous operation to let the laser cool down.
7.
Maintenance
• All screws should be tightened and free of corrosion.
• The housing, visible parts, mounting supports and the installation location
(e.g. ceiling, suspension, trussing) should not be deformed, modified or
tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
• Moving mechanic parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
• Disconnect the device from the mains prior to maintenance activities.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or
solvents.
14.11.2011
VDL150RGML
5 cooling fan
6 strobo speed control
7 function switch
8 5Vdc input
5
©Velleman nv