Publicité
Les langues disponibles
Les langues disponibles
LIST OF COMPONENTS
fig.1
A My time High Chair
B Tray
C Tray cover
OPENING
fig.2
Stand behind the high chair (A) and press the buttons (A1) on the right and on the
left at the same time, hold the chair as it opens until it locks in place with a Click.
Caution! Before using the product, make sure that it is fully open and blocked
properly.
e
fig.3 Caution: in this seating position, the high chair cannot be used for the child!
(The high chair has this configuration only when the product is unpacked for the first time).
f
HEIGHT ADJUSTMENT
fig.4 To achieve the first utilisation configuration, lift the seat until hearing both clicks for
t
a correct attachment.
The high chair is designed with 4 different height adjustments.
d
fig.5
To lift the seat, hold the high chair and pull the seat upwards: it will position
automatically.
fig.6
To lower it, simultaneously press both levers (A2) and take it to the desired position.
TRAY
fig.7
To attach the tray (B) position it next to the high chair armrests and use the lever
;
(B1) under the tray to push it as forward as possible.
Caution! Always verify that the tray is correctly hooked before use.
fig.8
Use the lever (B1) to retract the tray as much as possible.
fig.9
The tray is equipped with an easily removable tray (C) cover that can be washed
even in the dishwasher.
fig.10 If needed, the tray (B) can be easily put away by hooking it onto the slots (B2)
located under the rear legs of the high chair.
SEAT INCLINATION
It is possible to recline the high chair into 3 different positions.
fig.11 Hold the (A3) handle and incline the chair to the wished position.
SAFETY BELTS
fig.12 Verify that the safety belts are inserted in the eyelets at the height of the shoulders
or immediately above. If the position is not correct, extract the belts from the first pair of
eyelets and reinsert them in the second one; always use eyelets at the same height.
fig.13 Make sure that the back strap is properly inserted in the ends of the waist one.
fig.14 Fasten the ends of the waist belt to the central buckle.
fig.15 The waist strap must always pass through the side loops (A4) and, when being
used, it must be adjusted in order to properly secure the baby.
fig.16 Always use the crotch strap together with the waist one, adjusting both of them
properly.
Caution! The inobservance of this precaution may result in the falling or sliding
out of the baby with a resulting risk of injury.
ADJUSTING THE FOOTREST
fig.17 The footrest (D) can be adjusted to 3 positions; simultaneously press both buttons
(D1) and take it to the desired position.
INSTRUCTIONS
15
Publicité
