Nice HSMO Mode D'emploi page 8

Caution! – Nice S.p.a offers this service to the installer exclusively for collabo-
ration purposes, and does not accept any liability with regard to the installer or
user.
4.2 - Using the "teleservice" software
To start up the software "Teleservice" double click on the icon "NiceHsmo" on the
desktop or in the Programs folder; the following window is displayed to enable selec-
tion of the language used by the software:
On selection of the language, the main window is displayed:
– the upper section contains the buttons for the main software functions;
– the lower section contains the data indicating the software status and some infor-
mation useful for solving any connection problems; the COM port number used for
the connection is also displayed.
On initial start-upon of the software, all free COM ports not used for other purposes
are tested by the system, until the port used by the USB driver is found. This search
may last a few seconds, if the COM port number is rather high (the example in the fig-
6 – English