Publicité
Les langues disponibles
Les langues disponibles
The Control Panel
of your DHCC
1
15
1. Power Button:
Toggles the unit on/off.
2. Mode display area:
rent mode of operation.
3. Power Indicator light:
the unit is in operation.
4. Fan Speed Icons:
use (High/Low).
5. Warning Indicator:
enters a fault mode. (see pg 13 for details)
6. Water level display:
level of the internal bucket.
7. Ambient Temperature and Humidity display:
Shows current room humidity and/or temperature con-
ditions. Also displays error codes when the unit enters
a fault mode.
8. Fan Speed Button:
and Low fan speeds. Not used during humidification
mode.
9. Timer Button:
Used to initiate a delayed start
"on" time or delayed stop "off" time.
Operating Instructions
3
2
MODE
14
Icon(s) represent the cur-
Solid light signifies that
Shows which fan speed is in
Illuminates when the unit
Shows the current water
Alternate between High
4
5
88
88
8.8
h
I
0
13
12
10. Set humidity display:
ity level for the Dehumidifier or Humidifier.
11. Decrease button:
tings backwards (0.5 /1hr. increments).
Used to adjust Humidity settings backward (5% incre-
ments).
12. Timer Display:
start or stop time.
13. Remote control sensor
14. Increase button:
forwards (0.5 /1hr. increments).
Used to adjust Humidity settings forward (5% incre-
ments).
15. Mode selection button:
pressed to alternate between available operating
modes. The symbol for the mode(s) selected will
appear in the LED display (see 'Display icons'. on pg 7
for details).
6
6
7
RH%
ºF
ºC
RH%
9
10
11
Displays the set humid-
Used to adjust Timer set-
Shows the selected delayed
Used to adjust Timer settings
This button is
8
Publicité
