Bosch 06039A3402 Notice Originale page 17

Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for tightening and loosening
screws, as well as for drilling in wood, metal, ceramic and
plastic and for impact drilling in brick, concrete and stone.
The power tool can be used with an angle screw adapter, an
off-set angle adapter or a drill chuck adapter.
Technical Data
Cordless Drill/Driver
Article number
Rated voltage
No-load speed A)
– First gear
– Second gear
Impact rate at no-load speed
A)
Max. torque, soft screwdriving application ac-
cording to ISO 5393
A)B)
Max. torque, hard screwdriving application ac-
cording to ISO 5393 A)B)
Max. drilling diameter (1st/2nd gear)
– Steel
– Wood
– Masonry
Max. screw diameter
Chuck capacity
Tool holder
Weight according to EPTA-Procedure
01:2014
Recommended ambient temperature during
charging
Bosch Power Tools
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Holder
(2) Torque presetting ring
(3) Operating mode preselection ring
(4) Gear selector switch
(5) Battery release button
(6) Battery
(7) Worklight
(8) Battery charge indicator
(9) Rotational direction switch
(10) On/off switch
(11) Drill chuck adapter
(12) Off-set angle adapter
(13) Angle screw adapter
(14) Handle (insulated gripping surface)
(15) Universal bit holder
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
AdvancedImpact 18 Drill chuck
QuickSnap
3 603 JA3 4..
V= 18
min -1 0–400
min -1 0–1350
min 0–20,250
-1
Nm 19
Nm 38
mm 10
mm 30
mm 10
mm 8
mm 0.8–10
6.42 (¼")
kg 1.4 B)
°C 0 to +35
English | 17
A)
Off-set Angle screw
adapter angle ad- adapter
apter
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– –
– 6.42 (¼") 6.42 (¼")
0.3 0.3
– –
1 609 92A 66Z | (17.11.2020)
–
–
–
–
–
–
–
–
–
–
–
–
0.3
–