Publicité
Les langues disponibles
Les langues disponibles
To use the remote control:
Press the power button to turn on/off the appliance.
Press the max mode button the digital display will show "H" and
the wind speed becomes maximum. Press again to exit the
mode. (You can also exit the mode by pressing the button "+/-".)
Press the quiet mode button the digital display will show "L" and
the wind speed becomes minimum. Press again to exit the
mode. (You can also exit the mode by pressing the button "+/-".)
Press the oscillation button to turn on the oscillation function.
Press this button again to stop oscillating.
Press the "+" button to increase the air volume. Press the "-"
button to decrease the air volume. There are 9-speed settings.
Press the timer button to set the working time from 1 to 8
hours. A small "·" will flash on the digital display to indicate the
timer is under setting/operation.
Note:
1. The digital display will extinguish in approx. 20 seconds with no operations. If you want to do further
operations, firstly press any button (except for the power button) on the remote control or press the touch
screen button on the fan body to turn on the digital display and then press your desired buttons to choose
your desired functions.
2. After the timer is set, the digital display will turn back to show the speed level and extinguish later. If you
want to check the remaining time, turn on the digital display first and then press the timer button once on
the remote control, the remaining time (by hour) will be shown on the digital display.
LOCATION
Away from curtains
◼
Please use the fan on a flat platform. Do not place
the fan in an unstable place, such as an inclined or
soft surface, to avoid damage or malfunctions
caused by the fan tipping over.
◼
Avoid blocking the air inlet when using. Stay away
from the curtains to avoid objects blocking the air
inlet and the fan not working.
◼
Do not place any objects within 30 cm of the air
outlet, otherwise the blower effect will be
impaired.
- 6 -
Publicité
