Beamz Pro NEREID380B Mode D'emploi page 29

Address 001-512
DMX Mode Mode1
Mode2
Effect mode No/Yes
Started lamp Off/on
Switch lamp Off/on
No signal Clear
Hold
UI Color Blue
Golden
Show time No/Yes
Brightness 000-255
Effects sync Off/speed1-7
Screensaver Off/on
XY encoder Off/on
X inversion No/Yes
Y inversion No/Yes
Focus inversion No/Yes
Zoom inversion No/Yes
*This is the main parameter setting of the fixture and requires permission*
Error List No error/View
Display Ver Vxxxxxxx
Mainboardv Vxxxxxxx
Serial NO. xxxxxxxx
SYS timer 00000.0H
Run timer 000:00
Lamp timer 00000.0H
Permission --/--
Equip TEMP 000
Head TEMP 000
FAN 1 Speed 0000 RPM
FAN 2 Speed 0000 RPM
FAN 3 Speed 0000 RPM
FAN 4 Speed 0000 RPM
Pan Coder
Tilt Coder
Run mode Auto/Sound/DMX
Run speed 255
Run cross 255
Built-in 1 Off/on
Built-in 2 Off/on
User PRO 1 Off/on
User PRO 2 Off/on
User PRO 3 Off/on
User PRO 4 Off/on
Circle shape Off/on
Square shape Off/on
Shape range 000
Sound DB 000
Set address code
Select DMX control mode
Effect wheel automatically finds the shortest distance to rotate and run
Choose to turn the bulb "on" or "off"
Turn on the lamp manually
Keep DMX value or clear DMX channel value when no DMX signal
Select screen menu color
Display the runtime timer on the main screen
No function
Sync effects
Turn off the screen when no touch and key operation
Cancel or use the XY auto-correction function
Select X-axis to run forward or reverse
Select Y-axis to run forward or reverse
No function
No function
If there are no errors or there are errors, click OK to view the errors
Display version information
Mainboard version information
Equipment factory number
Total system running time (hours)
Running time after this power-on (hours)
The total time of lamp on (hours)
The temperature of the main part (requires device support)
The temperature of the head (requires device support)
fan 1 speed (requires equipment support)
fan 2 speed (requires equipment support)
fan 3 speed (requires equipment support)
fan 4 speed (requires equipment support)
Run selected programs Auto or Sound or DMX
Set the speed of Auto running
Set run cross for Auto or Sound
built-in test program 1
built-in test program 2
User-programmed program 1
User-programmed program 2
User-programmed program 3
User-programmed program 4
(reserve)
(reserve)
(reserve)
Adjust the sound control sensitivity