Rehaforum MEDICAL Actimo Home Manuel D'utilisation page 7

Assembly
Your dealer will gladly assist you with the assembly.
1. Before unpacking, check the box for any damages. If the contents are damaged, contact your
dealer immediately. The rollator is delivered fully assembled and tested by the dealer or
support personnel.
2. Take out the rollator. Unfold the rollator by pushing down the upper black crossbar(see figure
1). Check at the lower crossbar if the folding mechanism is completely unfolded(see Figure 2).
Fig. 1
3. Then insert the handle (see Figure 3) and adjust the height with knob to fixed it(see figure 4).
Fig. 3
4. To adjust the handle height, loosen the two wing nuts on the frame by turning them counter-
clockwise (see Figure 4). Remove the two screws one after the other and hold the handle.
Adjust the height (see Figure 5) and insert the two screws from the inside through the frame
holes. Tighten both screws clockwise.
Fig. 5
5. 5. Place the insert floor and gently press the tray onto the frame (see Figure 6.).
Revision 10/2023
Fig. 2
Fig. 4
Fig. 6
7