Télécharger Imprimer la page

EPTA EPTABRICKS 2.0 OUTDOOR Instructions Pour L'utilisateur page 105

Publicité

Les langues disponibles

Les langues disponibles

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
• The additional door requested will enable
and open. As soon as the door is loaded,
please close it.
• If you want to add another door, press the
key on the bottom right again. Instead, if
the goods on the order was fully loaded,
press the key on the bottom left.
Doc. n° UM000648 | Rev. A | 13/01/23
EPTABRICKS 2.0 OUTDOOR
Epta Spa - Via Mecenate, 86 - 20138 Milano (MI) ITALIA
Tel. 02/55403211 Telefax 02/55401023
10.9
Cleaning and ordinary
maintenance
Good visibility in the intervention area is
recommended, possibly using an additional
light source.
Cleaning the cabinet
Only use water at a maximum temperature of
65°C and household soap or neutral detergent
diluted in water.
Never use:
• Abrasive sponges
• Flammable or abrasive products such as
alcohol, acetone or solvents
• Detergents
surfactants, lemon or vinegar (acetic acid)
Fig. 46
F
Do not wash or clean the top part of the
cabinet with water or liquids.
Clean all the external parts of the cabinet ONCE
A WEEK:should be cleaned with a cloth and a
neutral soap and water solution.
TOUCH SCREEN: Never use solvents of any
kind, never pour water directly on the screen.
Slightly dampen a cotton cloth and pass it over
the screen to remove dirt or foreign bodies. Dry
the screen well and pass over it with a microfibre
cloth.
Clean all the internal parts of the cabinet ONCE
A MONTH, following the instructions below:
• Disconnect the power supply to the cabinet
using the wall-mounted main switch-
disconnector ("Fig. 29").
• Empty the cabinet, storing the goods in
cold rooms or refrigerators to maintain the
preservation temperature.
• Wait for the inside of the cabinet to have
reached the ambient temperature and
Fig. 47
then clean
• After carefully checking that the inside of
the cabinet is completely dry, restart the
appliance by re-energising the cabinet.
• After a couple of hours, load the goods
again.
23/27
User manual
that
contain
non-ionic
IT
FR
EN
EN
DE
ES
PT
23

Publicité

loading