AEG EC6-1 Serie Notice D'utilisation page 10

PROBLEM
One-cup indicator and two-cup
indicator blinking quickly.
One-cup indicator, two-cup indicator
and steam indicator blinking quickly.
ALL indicators blinking at the same
time for 5 times.
Filter holder is too tight to operate.
Coffee flows drip by drip.
DISPOSAL
Recycle the materials with the symbol
components by type and dispose them in applicable containers according to local disposal instructions.
Recycling of packaging materials reduces the use of raw materials and amount of waste in landfill sites. Help
protect the environment and human health by recycling your packaging.
Do not dispose appliances marked with the symbol
local recycling facility or contact your municipal office.
AEG reserves the right to change products, information and specifications without notice.
For Switzerland:
Where should you take your old equipment?
Anywhere that sells new equipment or hand it in to official
SENS collection points or official SENS recycling firms. The
list of official SENS collection points can be found at www.
erecycling.ch
10
POSSIBLE CAUSE
Make hot water for 40ml and then the
steam knob is not reset.
The steam knob is not reset after cooling
down.
Boiler temperature is too high.
The steam knob is not reset, but the
machine is turned on.
Need descaling.
Too much coffee powder filled in filter.
Too much powder.
Too fine coffee powder and tamped
too tight.
Filter cup blocked.
. The packaging materials can be recycled. Please sort individual
with the household waste. Return the product to your
SOLUTION
Reset steam knob to "OFF"
position.
Cool it down by perform
Step 11.
Reset steam knob to "OFF"
position.
Perform decalcifying.
Fill filter cup with less coffee
powder.
Fill filter cup with less coffee
powder.
Make more coarse coffee
powder or tamp coffee powder
with less force.
Clean the filter cup with
cleaning pin.
www.aeg.com