Publicité
Les langues disponibles
Les langues disponibles
Instructions for Use
Getting started
•
Remove all packing material, any stickers from the product, and the plastic band
around the plug.
•
Please go to www.prodprotect.com/powerxl to register your warranty.
•
Remove and save literature.
•
Wash all removable parts as instructed in Care & Cleaning Section of this manual.
Blender assembly
1.
Turn jar upside down and place flat on counter top or
work surface.
2.
Place the blade assembly in bottom opening of the jar
with blades down (A).
Caution: Blades are sharp. Handle carefully.
3.
Rotate blade assembly clockwise until it is tight.
4.
Turn assembled jar right side up.
5.
Place blender lid with cap on top of jar and align with
arrows (B).
6.
Unwrap power cord from storage area under the
appliance base.
7.
Place jar assembly onto the appliance base and turn
clockwise until jar locks onto base and arrows align (C).
8.
Plug appliance into outlet. Blender is ready for use.
Using the blender
Important: Appliance should always have lid in place
when in use.
Caution: Do not place jar onto base when motor is
running.
1.
Make sure appliance is OFF.
2.
Place foods to be blended into jar. For best results
place ingredients in jar in the following order: liquids,
powders, soft foods, hard foods, ice.
3.
Make sure lid is securely on jar and lid cap is in place.
Note: When in use, do not leave blender unattended. When using hard foods, such as
ice or cheese, keep one hand on the lid to keep blender in place.
4.
Select the speed or function that best suits your desired task.
(See CONTROLS CHART).
8
BL7019Series_BL_30374_ESF_IB_A.indd 8
BL7019Series_BL_30374_ESF_IB_A.indd 8
A
B
C
7/9/24 3:15 PM
7/9/24 3:15 PM
Publicité
