x-sense XS01-WX Manuel D'utilisation page 7

20''
CEILING
(50 cm)
MINIMUM
NEVER HERE
BEST
HERE
ACCEPTABLE
HERE
NOT IN
THIS AREA
4''
(10 cm) ANYWHERE
IN THIS AREA
3 ft 3 ft
(90 cm) (90 cm)
DEAD AIR 4''
SPACE
(10 cm)
MINIMUM
12''
(30 cm)
MAXIMUM
SIDEWALL
NOT IN
THIS AREA
ANYWHERE
4''
IN THIS AREA
(10 cm)
3 ft
(90 cm)
10
Installation Procedures
Before installation, you will need to test the alarm, making sure it is
functioning properly within the router's range. Then, install the alarm as
follows:
1. Mark holes on the ceiling or wall using the mounting bracket as a
guide.
2. Drill holes at the two marked positions with a drill bit. Insert the anchor
plugs, then attach the mounting bracket using the provided screws.
3. Attach the alarm to the mounting bracket, then turn clockwise to lock
the alarm.
4. Test the alarm by pressing the Test/Silence button. It should flash red
three times with three short beeps, and then flash blue.
11