Publicité
Les langues disponibles
Les langues disponibles
Battery Replacement
1. Remove the smoke alarm from the mounting bracket by twisting
counterclockwise.
2. Take out the old battery and install a new one, making sure to match the
battery's polarities.
3. Test the alarm by pressing the Test/Silence button on the device.
4. Attach the alarm onto the mounting bracket by twisting clockwise until it
is firmly secured.
Note:
When you replace the battery, the LED indicator on the alarm will flash red
once and blue for a few seconds, indicating the alarm is back online. If the
LED indicator flashes blue for longer than two minutes, you will need to
re-add the alarm to the system by repeating the steps above.
18
Troubleshooting
Description
Problem
The device does
Dead batteries
not alarm during
or improper
a test.
operation
False alarms are
Improper
triggered when
installation
cooking or
location or
taking a shower.
maintenance
Solution
Check the battery.
•
Firmly press the
•
Test/Silence button.
Avoid placing alarms near
•
cooking appliances, dusty
areas, showers, or any
areas where the
temperature drops below
40°F (4.4°C) or rises above
100°F (37.8°C). See the
Location and Installation
section.
Clean the alarm every
•
three months to avoid
unwanted alarms caused
by dust and dirt. See the
Maintenance section.
19
Publicité
