Publicité
INFO: Geschwindigkeits-Regler:
Hier können Sie je nach Bedürfnis die Lüftungsstufe einstellen:
• Hoch (II)
• Niedrig (I)
• Aus ( )
3. Gerät ausschalten:
Stellen Sie dafür einfach den Geschwindigkeitsregler auf ,
das Gerät schaltet sich damit ganz aus.
Display:
Zeigt die Heizkörpertemperatur, den Ladestand des Geräts
und die Lüftungs-Einstellung:
• °C - Gradzahl, z.B. 35 °C ist die Heizkörpertemperatur
• % - Batterieladestand
• Hi/Lo - Einstellung der Lüftergeschwindigkeit
Pflege und Wartung:
Dieses Produkt ist nur durch Abwischen zu reinigen.
Vermeiden Sie die Verwendung von Reinigungsmitteln.
Technische Daten:
Input: 5V⎓ 2A Power: 10 W
IMPORTANT SAFETY INSTRUCTIONS
• Retain these instructions for future reference.
• This device contains batteries that are non-replaceable.
• The device may be used by children who are 8 years of age
or older and by people with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
but only if they are supervised or have been adequately
instructed on the safe use of the device and the hazards
involved. Children must never be allowed to play with the
device. Cleaning and maintenance may only be carried out
by children under adult supervision.
• The device may only be charged using the power supply/
4
Hergestellt in China
EN
adapter provided.
• Only use on the radiator. Do not cover the intake and
exhaust air openings.
• Do not use on radiators that can reach a temperature of
over 70°C.
• Accessories that are not included in the scope of delivery
must not be used.
BEFORE USING FOR THE FIRST TIME, PLEASE NOTE:
This product is designed to be placed on a flat radiator. If your
radiator does not have a flat top, the performance of the unit
may be lower. Fully charge the device before using it for
the first time.
Product info:
This device is ideal for double convection radiators as well
as most cast iron style radiators and classic wall-mounted
radiators (#3a).
This device is not suitable for oil-fired heaters, heated
towel rails, electric heaters or fireplaces (#3b).
OPERATING INSTRUCTIONS
Setup:
For best performance, the product should be placed flat in the
center of the radiator, making sure that the bottom of the unit
and the top of the radiator are parallel. The "lip" on the front of
the device should protrude above the radiator (as also shown
in #4) and be as close to the front as possible. Always make
sure that the safety magnet touches the top of the radiator so
that it cannot fall off.
Installing the stand safety feet (optional) #5
The safety feet are optional and intended for use with
traditional radiators with a convector. To install, screw the
thread until the distance between the safety foot and the
front "lip" of the unit is optimal to fit over the radiator. After
adjustment, position the unit over the radiator. This is to prevent
the unit from tipping forward and falling off the radiator.
Publicité
