Protocol KAPTUR GPS Serie Manuel D'instructions page 14

RETURN HOME
When in the Return Home mode, the drone may not take a direct path back to the
take off location due to satellite signals and other variants. You can make left and
right banking adjustments but other directional controls will be disabled.
* To exit Return Home mode, press and hold the Return Home button for
2 seconds. The remote control will beep twice indicating that it has left
Return Home.
If you feel that you have lost control of the drone, exit Return Home and
press land.
* If you wish to exit Return Home mode, press and hold the Return Home
button for 2 seconds.
** If the GPS signal is weak, the return home function will not work and you will
need to manually fly the drone back to you.
*** Dependent on the GPS signal, the drone may not return to the precise
location from where it took off from. Variation of a few feet is to be expected.
GEO-FENCING
The drone's GPS will automatically create a virtual boundary to keep the drone
within transmission range. The boundary will extend to 150 meters from take-off.
When the drone reaches the boundary, it will stay there and not fly further away.
*Wind can affect the Geo-Fencing function and push the drone out of the
boundary. Always exercise caution when flying outdoors.
10