Publicité
Les langues disponibles
Les langues disponibles
CALIBRATING THE COMPASS
Once the drone and remote have synced, you must calibrate the compass.
1. Push the throttle to the lower right corner and hold. Press the Return Home
button once (Fig.1).
2. The indicator lights will begin to flash slowly. Release the throttle and pick
up the drone, holding it horizontally and 1 meter from the ground.
3. Slowly rotate 360° horizontally until the indicators begin to flash quickly
(Fig. 2). You may have to rotate a few times.
4. Hold the drone vertically and rotate 360° until the indicators are steady
(Fig. 3). You may have to rotate a few times.
*Never calibrate in areas with numerous and large metal objects such as parking
lots. Do not have your phone on you while calibrating.
CONNECTING TO SATELLITE
Once you have calibrated, you may notice the battery's backlight flashing. The
drone is searching for satellite signals. Once it has found enough GPS points,
the light will turn steady and the drone is ready to fly.
2
1
3
7
Publicité
