Publicité
Les langues disponibles
Les langues disponibles
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Locking sleeve
(3)
Gear selector switch
(4)
Battery release button
a)
(5)
Rechargeable battery
a)
(6)
Rotational direction switch
(7)
On/off switch
(8)
"PowerLight" lamp
(9)
Handle (insulated gripping surface)
(10) Double bit
(11) Universal bit holder
a)
(12) Screwdriver bit
a)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Cordless Impact Wrench
Article number
Rated voltage
No-load speed
A)
– Setting 1
Bosch Power Tools
EasyImpactDrive 12
3 603 CD6 6..
V=
12
min
-1
0–1 400
Cordless Impact Wrench
– Setting 2
Impact rate
A)
– Setting 1
– Setting 2
Max. torque, hard screw-
driving application accord-
ing to ISO 5393
A)
Machine screw diameter
Max. screw diameter
Tool holder
Weight according to
EPTA-Procedure 01:2014
Recommended ambient
temperature during char-
ging
Permitted ambient tem-
perature during operation
and during storage
Recommended re-
chargeable batteries
Recommended chargers
A) Measured at 20−25 °C with rechargeable battery 10.8V 2.0Ah.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 88 dB(A); sound power level
99 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
Impact tightening of fasteners of the maximum capacity of
the tool: a
= 9.5 m/s
2
, K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
English | 13
EasyImpactDrive 12
min
-1
0–2 800
min
-1
0–2 400
min
-1
0–3 300
Nm
100
mm
M4–M12
mm
6
¼" internal hexagon
kg
1.0
°C
0 to +35
°C
–20 to +50
PBA 12V...
GAL 12...
2
1 609 92A 7WK | (03.06.2022)
Publicité
