Kenwood KS-908HT Mode D'emploi page 4

Assembly (Front Speaker)
1. Lay the speaker body on its side.
Place the speaker body gently on a level, stable surface
(on a chair, etc.).
2. Fit the base.
• The base is heavy. Take care not to drop it on your foot.
3. Clamp the base using the provided screws.
4. Pass the speaker cord through the bottom of the base.
4
EN
Insert the speaker
cord here.
5. Connect the speaker cord to the terminals.
• Connect the wire with white stripes to the (+) terminal.
6. Stand up the speaker body.
1. Twist wire's conductor
2. Loosen
3. Insert the conductor
4. Secure