Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
6. CLEANING AND MAINTENANCE
-
Make sure the product is not plugged to the power supply or switched on before cleaning
or maintenance.
-
Use a soft cloth to clean the exterior housing of the electric scooter.
-
Never use alcohol, petrol, paraffin, corrosive, or abrasive products to clean the electric
scooter.
-
Never immerse the electric scooter in water or any other liquid to clean it, as this could
damage the electronic parts permanently.
-
Never use pressurised water to clean the electric scooter.
-
Do not try to repair the electric scooter on your own. In case it does not operate correctly or
is damaged, please contact the official Cecotec Technical Support Service.
-
Self-tapping nuts and other fasteners may loosen their hold and need to be retightened.
Brake disc
You must check the brake discs are in perfect condition, matching the brake calliper–fix this
easily with the Allen key provided. Brake pads are consumable parts and must be replaced
when their shelf life expires.
Storage
-
Make sure the electric scooter is charged before storing it for long periods of time. Charge
it at least once a month.
-
Charge it only if the room temperature is between 0°C and 35°C and store it at a temperature
between -10°C and 35°C.
-
Do not store the electric scooter outdoors. Store it in a safe and dry place. Cover it to
protect it from dust if necessary.
Battery release
To properly remove the battery for later recycling, you must remove the screws located on the
underside, on the side opposite the deck of the scooter.
7. ERROR CODES
If the electric scooter displays any of the following error codes, you should not attempt to
disassemble or repair the electric scooter yourself. Repairs carried out by unqualified persons
may result in injury or serious malfunctions. Please contact the place where you bought the
appliance or the official Cecotec Technical Support Service. The repair must be carried out by
an authorised technician, and you must use only original spare parts.
E0: overheating protection
68
BONGO SERIE D30
ORIGINAL MANUAL TRANSLATION
E1: motor failure
E2: motor phase failure
E3: brake failure
E4: accelerator failure
E5: low-voltage protection
E6: communication failure between controller and the display
E7: surge protection
E8: motor start-up signal
E9: motor block failure
8. TECHNICAL SPECIFICATIONS
Reference:
07311
Product:
Bongo Serie D30 electric scooter
Features
Measuring units
Dimensions
Folded
Unfolded
Weight
Electric scooter weight
User requirements
Max. weight
Min-max height
Age bracket
ENGLISH
Specifications
110x59x53.5 cm
110 x 59 x 118 cm (1)
15.9 kg
100 kg
100-200 cm
> 16 years old (2)
BONGO SERIE D30
69
Publicité
