DeLOCK 63309 Mode D'emploi page 3

English
Package content
• Hub USB
• 1 x cable USB A male to USB B male, length ca. 1 m
• 2 x wall mounting brackets
• 1 x mounting for 35 mm DIN rail
• 1 x 3 pin terminal block
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Installation
1. Connect the enclosed USB cable to the USB Type-B port of the hub and a
free USB port of your system.
2. The hub will be recognized and you can start using the device immediately.
3. Additional you can connect a power supply to the DC port or the terminal port
to serve the connected devices with power. This is needed for the devices
which are connected to the hub if the power from USB port of the system is
not enough.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 02/2018
-3-