Publicité
Les langues disponibles
Les langues disponibles
8. TOOL OPERATION
Tightening the bolt or nut
1. Select the forward / reverse switch
to "forward" position.
2. Press socket onto the square drive.
3. Push on main switch to start the
tool. The tool has a build in overload
device to cut off the power once the
tool reaches its maximum torque.
This is to protect the motor in the
tool if over load and end user's wrist
from harm by the tool motion.
4. This tool can also be used manually
after the bolt is tightened.
Loosening the bolt or nut
1. Select the forward / reverse switch
to "reverse" position.
2. Press socket onto the square drive.
3. Push on main switch to start the tool.
Turn the bolt manually 1~2 turns if the tool can not release the bolt initially.
9. SPECIFICATIONS
Model
...................................................................................................................................................................
Switch
.......................................................................................................................................
Voltage
...................................................................................................................................................................
No-Load Speed
........................................................................................................................
Max. Torque
...........................................................................................................
Square Drive Size
.....................................................................................................................................................
Tool Weight
...........................................................................................................................................................
Battery Weight
..................................................................................................................................................
Charging Time
BCL31C1: 12V - 2.0Ah
The charging time may vary from the battery life and room temperature
10. DISPOSAL
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban
waste.
If must be taken to a special local authority differentiated waste collection
centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences
for the environment and health deriving from inappropriate disposal and enables
the constituent materials to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
..............................................................................................................
Minutes Auto Cut-Off Charging Time (approximately)
•
9
•
Forward position
Reverse position
for tighten
for loose
Main switch
Variable speed switch
0~220 r.p.m. (/min)
581 kg-cm / 57 N.m / 42 ft-lb
.
BCL31R1
12V d.c.
1/4"
0.77 kg
0.185 kg
35-40 minutes
Publicité
