Eaton TRIPP LITE Serie Manuel Du Propriétaire page 3

Installation
Note: Make sure all devices you are connecting are powered
off before installation.
1. Connect the cable's HDMI plug to the source's
HDMI output.
2. Connect the cable's DisplayPort plug to the
monitor's DisplayPort input.
3. Power on both the source and the display.
4. Optional: If more power is required than the
source provides, connect the built-in USB cable to
an available USB-A port on the source.
Specifications
Specification
Input Ports
Output Port
Operating
Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Max Video
Resolutions
Value
HDMI (Male)
USB-A (Male: for power only)
DisplayPort (Male)
32° to 158°F / 0° to 70°C
14° to 176°F / -10° to 80°C
10 to 85% RH, Non-Condensing
5 to 90% RH, Non-Condensing
4096 x 2160 @ 30 Hz
3