Polar CD610 Mode D'emploi page 4

EN
Pack Contents
The following is included:
• POLAR Refrigerator / Freezer
• Shelves - Refrigerator only
CD610/CD080 x 3
CD612/CD082 x 4
CD614/CD084 x 4
POLAR prides itself on quality and service, ensuring that at the time of unpacking the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your POLAR dealer immediately.
Installation
Note: A bracket is used to support the door during transportation. On receipt please remove the bracket.
Note: Not for use in vans or trailers, food trucks or similar vehicles.
If the unit has not been stored or moved in an upright position, let it stand upright for
approximately 12 hours before operation. If in doubt allow to stand.
1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces.
2. To optimize performance and longevity, ensure a minimum clearance of 2.5cm is maintained between
the unit and walls and other objects, with a minimum 20cm clearance on the top. NEVER LOCATE
NEXT TO A HEAT SOURCE.
Note: Before using the appliance for the first time, clean the shelves and interior with soapy
water then dry well.
The appliance is supplied with feet by default. However, castors can be supplied as an
option from serial number range: 8124199-UK / 8128873-EU onwards.
Mounting the door handle
1. Pull the door gasket aside to expose the 2 pre-
drilled holes. Insert the screws.
Gasket
4
CD610-CD615_CD080-CD085_GL185_ML_A5_v22_20240620.indb 4 CD610-CD615_CD080-CD085_GL185_ML_A5_v22_20240620.indb 4
• Tray Guides - Bakery refrigerator only
GL185 x 12
• Keys x 2
• Spacers x 2
• Instruction Manual
• Door handle assembly
2. Mount sleeve on the other end of screw.
Tighten screws to fix the handle in place.
Screw
Sleeve
2024/6/20 09:59 2024/6/20 09:59