Electrical Connection - Pkm F 3 Mode D'emploi

2.3 Electrical connection

Instructions for the installer (qualified professional)
The appliance is designed to be connected to a 230V-50Hz electricity supply. Total
power absorbed is 3000W. The cable used for connection must have a cross
2
section of 1.5 mm . The direct connection to the mains supply must have a double
pole switch with a minimum rating of 250V, 20A. The switch must not brake the
yellow-green earth cable at any point.
 The cable must be placed in such a way that it cannot touch a high temperature
area at any point after installation and connection.
24