OZ Lifting Products WHEEL BASE Manuel De L'opérateur page 5

Safety Warnings
Failure to read and comply with the following warnings may result in a hazardous situation that could lead to death,
serious injury, or property damage. Keep this manual near the equipment at all times. Do not remove, alter, or obscure
the labels attached to the winch. Contact OZ Lifting Products, LLC
WARNING
DO NOT operate a damaged or malfunctioning product.
DO NOT lift more than the rated load of the crane or its attached components.
DO NOT use additional cranes to move a load that is heavier than the load rating of any single crane in use.
DO NOT modify this product in any way.
DO NOT use for other functions except those for which this product is intended.
DO NOT remove, deface, or obscure warning labels.
DO NOT allow load to swing or jerk. Operate smoothly to avoid shock loads.
DO NOT lift any load that is not located directly below the crane. This product is not intended to drag a load sideways.
DO NOT wrap the load with the wire rope. Use only a sling or another manufacturer-approved device.
DO NOT operate without at least four (4) anchor wraps of wire rope around the winch drum.
DO NOT operate without assuring wire rope is securely attached to the winch drum.
DO NOT operate without checking for proper lubrication.
DO NOT put hands in areas with moving parts such as sheaves, wire ropes, and gears.
DO NOT lift people.
DO NOT lift loads over people.
DO NOT operate until personnel are warned of approaching loads and are cleared from the area.
DO NOT leave a suspended load unattended.
DO NOT substitute smaller diameter pins. Use only the pins supplied with the crane.
DO NOT use chains, cables, or rigid devices to lift crane. Nylon or other synthetic slings should be used instead.
DO NOT use on unlevel or uneven ground.
Failure to read and comply with the following warnings may result in a hazardous
situation that could lead to death, serious injury, or property damage.
Wheel Base Operator's Manual • OZ Lifting Products, LLC
for replacement manuals and labels.
®
• 6/2024
®
SAFETY
5