OZ Lifting Products WHEEL BASE Manuel De L'opérateur page 16

OPERATION
Crane Pre-Installation
Check for damage during shipment. Do not install or use a damaged product. Be sure to maintain records of product
information and contact your OZ Lifting Products, LLC dealer with any problems that arise. Refer to applicable codes
®
and regulations before installing equipment. Contact a qualified professional to obtain structure and foundation
specifications for product mounting.
Before installing, select a location where the crane is:
• Visible throughout its entire operation.
• Free of traffic and any possible operational interference.
• Positioned so the operator is clear of both the load and the path of the wire cable.
• Accessible for maintenance.
• On a strong, level foundation, that can properly support it under all conditions.
• Removed from any corrosive, flammable, explosive, or potentially damaging materials.
Inspect the crane to assure there are no missing or damaged parts. Do not discard the crane's shipping containers as
they can be reused if the crane needs to be repackaged. Contact your OZ Lifting Products, LLC dealer if any problems
®
arise.
Assure that all components, including the pin that the load sheave rides on, are properly lubricated before assembling.
Refer to Cleaning & Lubricating the Crane Instructions on page 31.
During assembly, perform an inspection of all components and resolve any issues. This will provide a benchmark
comparison for later inspections.
16
Wheel Base Operator's Manual • OZ Lifting Products, LLC • 6/2024
®