Solax Triple Power T-BAT-SYS-HV-S25 Manuel D'installation page 91

Wiring with Series Box / Verkabelung mit Series Box / Câblage avec Series Box / Cableado
con Series Box / Ligação com Series Box / Bedrading met Series Box / Cablaggio con
Series Box / Połączenie przewodów ze skrzynką Series Box / Zapojení se Series Box
/ Kabeldragning med Series Box / Cablare cu Series Box / Свързване със Series Box
/ Ledningsføring med Series Box / Καλωδίωση με Series Box / Juhtmed koos Series
Boxiga / Kytkennät Series Boxia käytettäessä / Ožičenje sa Series Box / Vezetékezés
Series Box segítségével / Elektros instaliacija su „Series Box" / Elektroinstalācija ar
Series Box / Zapojenie so zariadením Series Box / Ožičenje s Series Box / Seri Bağlantı
Kutusu ile Kablolama / Cablagem com caixa de série
Wiring between BMS and Series Box
Communication cable: COM port of BMS to COM port of Series Box
Heater cable: HEAT port of BMS to HEAT port of Series Box
Power cable (black): BAT- of BMS to BAT- of Series Box
Power cable (orange): BAT+ of BMS to BAT+ of Series Box
Grounding cable: Grounding port of BMS to Grounding port of Series Box
1
*Note: A corrugated pipe with an inner diameter of over 45 mm is recommended for use
to keep cable insulation in place and avoid potential damages.
Heater cable
(HEAT port)
Grounding
cable
Power cable (black)
Lock
button
Power cable
(orange)
Heater cable
(HEAT port)
Power cable
(orange)
Grounding cable
Power cable (black)
There are two terminals at
both ends of power cable.
Communication
cable (COM port)
Rotation
wrench
Communication
cable (COM port)
87