Publicité
Les langues disponibles
Les langues disponibles
Installation steps with Series Box / Installationsschritte mit Series Box / Étapes
d'installation avec Series Box / Pasos de instalación con Series Box / Passos de
instalação com Series Box / Installatiestappen met Series Box / Procedura di installazione
con Series Box / Czynności instalacyjne ze skrzynką Series Box / Instalační kroky
se Series Box / Installationssteg med Series Box / Pași de instalare cu Series Box /
Стъпки за инсталиране със Series Box / Installationstrin med Series Box / Βήματα
εγκατάστασης με Series Box / Paigaldamisetapid koos Series Boxiga / Asennusvaiheet
Series Boxia käytettäessä / Koraci instalacije sa Series Box / Telepítési lépések a Series
Box segítségével / Montavimo veiksmai su „Series Box" / Uzstādīšanas soļi ar Series
Box / Postup inštalácie so zariadením Series Box / Postopki namestitve s Series Box /
Seri Bağlantı Kutusuile Kurulum Adımları / Etapas de instalação com caixa de série
1
*Note:
1. The rule for the sequence of battery modules in the whole system is as follows: In the
case of one tower, the battery module closest to the BMS is numbered the first battery
module, followed by the second battery module, the third battery module, according to
the top-down principle. If another tower exists, the battery module closest to the "Series
Box" can be continued numbering based on the tower with the BMS.
2. Regarding the cover plates on both sides of the BMS and the left side of the Series Box,
they should be installed after finishing wiring.
82
The tower also needs bracket
The installation procedure for
these two towers is the same as
that for one tower. Please refer
to "Installation Steps without
Series Box".
Publicité
