Solax Triple Power T-BAT-SYS-HV-S25 Manuel D'installation page 83

Base
The side with "R" shall be against the
wall
1
Draw location
4
Remove the dust covers at both
top and bottom of the battery
The side with "R" shall be
5
against the wall
7
Rear
Front
Turn clockwise, lower the Base
Turn anticlockwise, raise the Base
2
6
3
Note: The distance between the Base and
the wall can be about 30~200 mm, but the
recommended distance is 60 mm.
Note: If the Base is
shifted after placing
battery module, move
it to its original location
according to the mark
previously drawn.
Secure both sides
Remove
M4
0.9-1.1 N·m
79