Facom BSYS.TKVAN Notice Originale page 26

EN
INSTRUCTIONS
Step 2 – Upper EcoFix Position
Parts (x4) G (short EcoFix)
(x4) J (nut)
(x8) N (large washer)
(x4) L (75 mm screw)
 Note: When connecting the EcoFix
fastener to the profiles, place large
washers between the screw heads
and fastener and between the nuts
and fastener.
 Note: Where possible, it is
recommended to connect the EcoFix
via its furthest slots (and NOT its
holes).
2. Loosely connect the short EcoFix on
both sides of the rack top profiles,
through the top spacers.
INSTRUCTIONS
Step 3 – Lower EcoFix Position
Parts (x4) H (long EcoFix)
(x4) J (nut)
(x8) N (large washer)
(x4) L (75 mm screw)
 Note: When connecting the EcoFix
fastener to the profiles, place large
washers between the screw heads
and fastener and between the nuts
and fastener.
 Note: Where possible, it is
recommended to connect the EcoFix
via its furthest slots (and NOT its
holes).
3. Loosely connect the long EcoFix
on both sides of the rack bottom
profiles.
10
STEP 2
ACTION
STEP 3
ACTION
END RESULT
END RESULT