Rowenta PURE AIR GENIUS PU3080 Mode D'emploi page 13

Problem
The purifier doesn't
connect
Why did the pairing not
work?
WARRANTY
Do not use the appliance and contact an Approved Service Centre if:
– your appliance has been dropped;
– your appliance or its power cord are damaged;
– your appliance no longer functions properly.
You can find a list of Approved Service Centres on the Rowenta international warranty card.
HELP PROTECT THE ENVIRONMENT!
Your appliance contains many materials which can be recovered or recycled.
Leave it at a local waste collection point or take to an approved service center so that it can be processed.
These instructions can also be found on our internet site, at www.rowenta.com.
10
All manuals and user guides at all-guidesbox.com
Check
Is your phone connected to your
personal Wi-Fi network at the
beginning of the process?
The purifier doesn't seem to connect?
The WI-FI led of your purifier is not
flashing?
The first pairing didn't work?
My phone is connected to the Wi-FI
but not the purifier?
My phone isn't connecting to the
Wi-Fi?
Check the compatibility
Solution
Verify that you are conneted to your
personal Wi-Fi network.
Check that your purifier is plugged in
and turned on.
Hold the Wi-FI button for 3 seconds.
Restart the product to retry.
Make sure the two devices are in close
enough proximity to one another and
close to the WIFI router.
Check that your Wi-Fi router is
connected to the Internet
Check that the Wi-Fi password didn't
change
Supported encryption type:
WPA_1/WPA_2, TIPK; PSK, AES
Supported networks: 2,4 GHz
(not 5Ghz)