JBL STAGE 2 Serie Mode D'emploi page 9

EN
Connections
CAUTION: Make sure that all the system's electrical components are turned OFF (and preferably unplugged from their AC outlets) before
making any connections.
Speakers and amplifiers have corresponding positive and negative ("+" and"-") connection terminals. All Stage series speakers have
connection terminals that are marked "+" and "-" on the terminal-cup assembly. Additionally, the "+" terminals have red markings, while
the "-" terminals have black markings.
To ensure proper polarity, connect each "+" terminal on the back of the amplifier or receiver to the respective "+" (red) terminal on each
speaker. Connect the "-" terminals in a similar way. Do not reverse polarities (i.e.,"+" to"-" or "-"to"+") when making connections. Doing so
will cause poor stereo imaging and diminished bass performance.
Connections, Bare Wire Connectors:
USING SPADE CONNECTORS:
USING BANANA CONNECTORS:
JBL Stage 2 QSG | Rev 1.0 20240402
©2024 HARMAN International | Features, Specifications, and Appearance subject to change without notice. Pg 6 of 10