Specifications - AKG DAM Série Mode D'emploi

5 Specifications

Installation Module w/
Type
Polar pattern
Frequency range
Sensitivity
Electrical impedance
Rated load impedance
Power requirement
Size (dia. x length)
Connector**
Installation Module w/
Type
Polar pattern
Frequency range
Sensitivity
Electrical impedance
Rated load impedance
Power requirement
Size (dia. x length)
Connector**
* Re 1 V/Pa
** Except GN 30 OC
This product conforms to the standards listed in the Declaration of Conformity. To
order a free copy of the Declaration of Conformity, visit http://www.akg.com or
contact sales@akg.com.
40
CK 31
Pre-polarized condenser microphone
Cardioid
50-20,000 Hz
20 mV/Pa
-34 dBV*
<600 Ω
>2000 Ω
9-52 V phantom power to DIN 45596 -
Requires DPA-P or DPA adapter (integrated in
GN** and HM 1000 Installation Modules)
13 x 25 mm
(0.5 x 0.95 in.)
XLR-3 or XLR-5
CK 47
Pre-polarized condenser microphone
Hypercardioid
20-20,000 Hz
16.5 mV/Pa
-35.5 dBV*
<600 Ω
>2000 Ω
9-52 V phantom power to DIN 45596 -
Requires DPA-P or DPA adapter (integrated in
GN** and HM 1000 Installation Modules)
13 x 154 mm
(0.5 x 5.85 in.)
XLR-3 or XLR-5
DISCREET ACOUSTICS modular
CK 32
Omni
20-20,000 Hz
14 mV/Pa
-37 dBV*
<600 Ω
>2000 Ω
13 x 25 mm
(0.5 x 0.95 in.)
XLR-3 or XLR-5
CK 80
Hypercardioid
60-15,000 Hz
30 mV/Pa
-30 dBV*
<600 Ω
>2000 Ω
13 x 128 mm
(0.5 x 4.86 in.)
XLR-3 or XLR-5
CK 33
Hypercardioid
50-20,000 Hz
20 mV/Pa
-34 dBV*
<600 Ω
>2000 Ω
13 x 25 mm
(0.5. x 0.95 in.)
XLR-3 or XLR-5