Publicité
Les langues disponibles
Les langues disponibles
Placement
- Place your device away from a heat source (heating, cooking,
sunlight). For the correct operation of your appliance, the ambient
temperature of the room must be between
+ 10 ° C and + 38 ° C (class SN-N-ST). Outside of these limits; the
device will no longer function normally.
-Make sure there is good air circulation behind the appliance, do not
Do not place it against a wall to avoid noise due to vibrations. Make
sure that air circulates freely all around the device. Insufficient
ventilation will cause malfunction and increased energy consumption.
This appliance must be installed so that the socket is accessible.
Make sure after installing it that it is not resting on the power
cable.
IMPORTANT: The installation of this device requires the intervention
of 2 people.
Network connection
Your appliance is designed to operate under 230 volts single-phase.
It must be connected to a wall socket equipped with an earth contact and
protected by a fuse.
10 A in accordance with standard NF C15-100 and the prescriptions of
your electricity supplier.
Unpacking the device and disposal of the packing materials
Remove all packing material from around the device, as well as any
protective material inside the device compartments.
▪ The cardboard packaging and sheets of paper are recyclable. They must
be disposed of in the collection bins provided for this purpose.
▪ Materials bearing the symbol
PE <= polyethylene; > PE <= polypropyl sound ree; cycl ... ables: This
means that they can be recycled by depositing them in appropriate
collection containers.
▪ the other packaging elements (adhesive, fasteners ...) must be disposed
of with household waste. For more information:
www.quefairedemesdechets.fr
EN-17
Publicité
