Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
3. INSTALLATION
-
The location you choose for the refrigerator must be properly ventilated and away from
heat sources. Do not place the refrigerator near heat sources, like a hob, and avoid
direct sunlight to ensure the cooling effect and save on energy consumption. It is not
recommended to place the refrigerator in a wet place, as it may rust and cause electrical
leakage.
-
During operation, the refrigerator releases heat into the environment. Therefore, you
should leave at least 300 mm of free space at the top, more than 100 mm on both sides,
and more than 50 mm at the rear of the refrigerator.
Height
Width (mm)
Depth (mm)
(mm)
912
704
1770
Fig. 2
Please note
Figure 2 only illustrates the space required for the refrigerator.
Stable surface
-
Place the refrigerator on a solid, flat surface to keep it stable, otherwise vibrations and
noises will occur.
-
Ensure a ventilation free of obstacles around the refrigerator.
Preparing for use
Waiting time
Once the refrigerator is installed and clean, do not turn it on immediately, wait at least 4 hours
before connecting it to the power supply.
Cleaning
Check the position of the shelves and drawers in the interior of the refrigerator and clean the
interior with a soft cloth.
On
Connect the plug into a power socket to switch on the refrigerator. After one hour, open the
freezer compartment door: if the temperature inside the freezer compartment has dropped,
the cooling system is running normally.
66
A (mm)
B (mm)
C (°)
E (mm)
F (mm)
1524
1062
160
50
100
Food storage
-
Once the refrigerator is running, insert the food.
-
When the temperature is high, food may take longer to cool down completely (try to open
the refrigerator doors as infrequently as possible).
-
If the refrigerator is installed in a wet place, you must check the earth wire and the circuit
breaker are working normally. If vibration noises occur due to contact of the refrigerator
with the wall or if the wall turns black due to air convection around the compressor, keep
the refrigerator further away from the wall.
-
The installation of the refrigerator may cause noise interference or image problems in
mobile phones, landline phones, radio receivers, or televisions near the refrigerator, so in
this case, keep the refrigerator as far away from these objects as possible.
4. OPERATION
Fig. 3. Control panel
1. Freezer-compartment icon
2. Smart icon (Holiday mode)
3. Inverter icon
4. Fast Freeze icon
5. Temp. button Zone
6. Function button
7. Unlock button
8. Refrigerator-compartment icon
9. Digital temperature indicator
10. Temp. button
11. OK button
-
When you connect the refrigerator to the power supply for the first time, all icons on the
display will light up for 2 seconds, and the system will activate the Smart function by
default. When all doors are closed, the display will automatically switch off if no button
is pressed within 3 minutes. The display will light up if you open a door or press a button.
Please note that the child lock is activated after 3 minutes of inactivity, so the buttons will
be inactive until you deactivate the child lock.
-
The Inverter icon will light up when the refrigerator is connected to the mains and the
compressor starts.
BOLERO COOLMARKET SBS 559 INOX / DARK / GLASS D (X/M/S/T)
ENGLISH
67
Publicité
