Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Cleaning and Care
Empty the water container
1. Pull out and hold the water
container with two hands.
2. Tilt the water container, pour
out the condensate water into
the basin.
3. Install the water container.
Warning!
！
Empty the water container after each use. Once the water
container is filled completely, the programme will be paused
and the "
dryer can be restarted by pressing Start/Pause button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
Clean the filters
This dryer has a primary door lint filter for additional protection.
Make sure you clean the door filter after each cycle.
Clean the door filter
1. Open the door.
2. Take out the door filter.
3. Open the filter and remove the fluff on
the filter, You can clean it in running
water.
4. Dry the door filter thoroughly before
installing it back.
Note!
Take notice of the correct
orientation before to insert the
door filter.
" icon will light. After the container is emptied, the
22
Door Filter
V.1
Publicité
