Télécharger Imprimer la page

EAS ELECTRIC EMTD81P1 Guide D'utilisation page 42

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
Before Each Drying
Note!
Leave it to stand for 2 hours after transporting. Before first
use, please use the soft fabric to clean the inside drum.
1. Put some clean rags into the drum.
2. Plug the power, press On/Off.
3. Select the Refresh Programme, press Start/Pause
button.
4. After finishing this programme, please follow the
"Cleaning and care " (refer to page 21) to clean the filter
door.
During drying, the compressor and the water will generate
some noise which is entirely normal.
1. Before drying, thoroughly spin the laundry in washing machine.
High spin speed shortens the drying time and saves energy.
2. For uniform drying result, sort the laundry according to fabric
type and select the appropriate drying programme.
3. Before drying, please close zips, hooks and eyelets, button, tie
fabric belts, etc.
4. Remove all objects from pockets such as lighters and matches.
5. Sew in or remove underwiring from bras.
6. Close duvet covers and pillow cases to prevent small items from
being rolled up inside them.
7. Leave jackets open and undo any long zips so that textiles dry
evenly.
8. Do not over dry the clothes, because over dried clothes can
easily get creases.
9. Do not dry the articles containing rubber or similar elastic
materials.
10.Keep the area around the tumble dryer clean. Coal dust or flour
may cause an explosion.
11. The door shall be opened only after the programme of the
tumble dryer is finished to avoid being scalded by hot steam or
over heated drying machine.
12. Clean the lint filter and empty water container after each use to
avoid extension of drying time and increase of energy
consumption.
13. Do not dry clothes after dry-clean process.
14
V.1

Publicité

loading