Num'axes PIE1028 Guide D'utilisation page 31

Configuration of operating parameters

Enter Configuration menu: In Test mode, press the RIGHT button to
enter settings configuration menu. In Configuration mode, the LEFT
button is always used for navigation and the RIGHT button is always
used to say OK and save/confirm the desired setup.

Return to Test mode from configuration menu: After all the settings
are done, press the RIGHT button for 3 seconds to return to Test
mode.

Enter PIR Auto Working mode from Test mode: Press the RIGHT
button for 3 seconds to enter PIR Auto Working mode (the indicator
light will flash 5 times and the LCD screen will go out).
Manual recording

In Test mode, press the LEFT button to shoot photos, videos or
photos + videos based on camera settings.

To stop video recording (in Video or Photo + Video mode), press the
LEFT button again.
PIE1028 – indice A – avril 2018 31/120