Num'axes PIE1028 Guide D'utilisation page 30

5. Inserting the micro SD card
The camera uses a standard micro SD (Secure Digital) memory card to save
photos and/or videos. Micro SD cards up to a maximum capacity of 32GB
are supported.
Before inserting or removing the memory card, the camera must be
turned off. Failing to do so may cause loss of or damage the files already
recorded on the memory card.
 Open the cover, and insert the SD card in the SD card slot completely
and oriented correctly as shown by the icon under the slot.
 To remove the micro SD memory card, depress it and pull it out
gently.
 Micro SD cards must be empty (no images from other sources). If the
micro SD card has been used in another device, please make sure to
format it before using it in your camera. New cards are ready to use
straight from the package.
6. Operation
ON/OFF (PIR Auto Working mode, Test mode, OFF)

Turn On the camera and enter PIR Auto Working Mode: Press the
LEFT button for 3 seconds, the indicator light will flash 5 times and
the camera will enter PIR Auto Working mode.

Enter Test mode: In PIR Auto Working mode, press the RIGHT
button once to wake up the camera LCD screen and enter Test
mode.

Turn Off the device: Press the LEFT button for 5 seconds to turn off
the camera.
PIE1028 – indice A – avril 2018 30/120