Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Check these solutions if your dishwasher...
Problem
Will not start.
An operation or
cycle is taking
too long.
46
English
DW9900R_DD68-00209B-05_EN.indd 46
Possible cause
The door is not closed
completely.
The START button was not
pressed.
Doesn't operate at all.
The water supply does
not work.
The Control Panel is
locked.
A circuit breaker is open.
The dishwasher is
connected to a cold water
supply.
Solution
• Check if the door is latched and closed
completely. Check whether the Upper
Rack is properly joined to the Duct
Nozzle.
• Also, check if the Upper Rack is crooked
or unbalanced.
• See the information code that appears
on the display.
• Make sure the power cable is connected
properly.
• Check if the water supply valve is open.
• Unlock the Control Lock, (See page 31.)
• Reset the circuit breaker.
• Check if the water supply line is
connected to a cold water supply. To
work properly, the dishwasher must
be connected to a hot water supply.
(If connected to a cold water supply,
additional time is required to heat the
cold water.)
2021-07-13
6:51:30
Publicité
