Publicité
Les langues disponibles
Les langues disponibles
Cleaning the drain pump
If the dishwasher fails to drain because the drain pump is clogged with foreign matter or
there is an abnormal noise coming from the drain pump, you must unclog and clean the
drain pump as instructed below.
1
Storing your dishwasher
If you need to store your dishwasher for an extended period of time, first drain and
disconnect it. If you leave water in the hoses and internal components, you can damage
the dishwasher.
After draining and disconnecting the dishwasher, be sure to turn off the water supply
valve and circuit breaker.
DW9900R_DD68-00209B-05_EN.indd 45
1. Remove the lower rack.
2. See the "Filter" section to remove the
cylindrical micro filter.
3. Remove any moisture from the filter
using a sponge.
4. Remove the drain-pump cover by
pushing its handle in the direction of
the arrow (1), and then pulling up (2).
5. Check the impeller to see if it's in good
condition. Then, remove any foreign
matter from the pump.
6. Reinsert the drain-pump cover and then
2
press down until you hear a click.
English 45
2021-07-13
6:51:30
Publicité
