Beta 564-3R/V Notice D'utilisation Et Instructions page 8

TORQUE MULTIPLIERS with anti-wind up system
TORQUE REACTION
When the tool is in operation, the reaction foot rotates in the opposite direction to the output
square drive and must be allowed to rest squarely against a solid object or surface adjacent
to the bolt to be tightened (see Figure 2).
Reaction
Reaction
MAKE SURE THAT THE REACTION FOOT IS ONLY USED WITHIN SUCH LIMITS
AS SHOWN IN FIGURE 3.
For special applications or if extremely deep sockets are used, the standard arm can be
extended, provided that such limits as shown in Figure 3 are kept to.
FAILURE TO KEEP TO SUCH LIMITS AS SHOWN IN FIGURE 3 MAY CAU-
SE EARLY WEAR OR DAMAGE TO THE OUTPUT DRIVE OF THE TOR-
QUE MULTIPLIER.
8
Torque
Clockwise
Torque
Clockwise
2
FIGURE
Torque
Reaction
Counterclockwise
Torque
Reaction
Counterclockwise
EN